Velleman WC8708 Manuale Utente Pagina 6

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 42
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 5
WC8708
Rev. 01
11.07.2013 ©Velleman nv
6
Alarm setting
Press and hold the ALARM-button [D] for ±5s. The display shows the
alarm time; the hours are flashing.
To change the setting, use the UP-[E] or DOWN-[F] button.
Press the ALARM-button [D] to confirm and move to the minutes-setting.
After setting the alarm minutes, press the ALARM-button [D] to confirm
and exit to normal display.
If no key is pressed within 8s the clock returns to normal operation.
8.
Operation
Alarm handling
To enable the alarm, press the ALARM-button [D] shortly. The alarm-icon
appears. To disable it, press the ALARM-button [D] again.
When the set time is reached, the alarm will sound. Format:
0~10s: 1 beep per second
11~20s: 2 beeps per second
21~30s: 4 beeps per second
31~120s: continuous beep.
To go into snooze mode, press the SNOOZE-button [A]. The alarm is
postponed for ±5 minutes and the snooze-icon appears.
Pressing any other button will stop and exit the alarm.
Weather forecast [4]
The weather icon shows a forecast of the weather for the next 24h.
There are 4 icons:
sun
sun/clouds
clouds
rain
Place the weather station in a natural ventilated area (e.g. not in a room
with air-conditioning) to get more accurate results.
Temperature display [5]
The temperature range is 0~50°C (32~122°F).
To switch between °C and °F display, press the CF button [F] shortly.
The trend indicator is based on the difference between a recorded
temperature and the current temperature. When the current temperature
is at least 1°C higher than the recorded, the arrow will point up and the
current temperature becomes the recorded. If the temperature is at least
1°C lower than the recorded value, the arrow will point down and the
current temperature becomes the recorded. In all other cases, the arrow
will be flat.
Note: the recorded temperature is set to the current temperature at
start-up or reset of the weather station.
Vedere la pagina 5
1 2 3 4 5 6 7 8 9 10 11 ... 41 42

Commenti su questo manuale

Nessun commento