Velleman VSCP1 USER MANUAL Manuale Utente Scaricare il pdf

VSCP1-VISP1 VELLEMAN

VISP1

PAN/TILT UNIT

USER MANUAL

1. INSTALLATION

The unit is intended to be mounted on a Wall Mount. Installation of the pan

and tilt drive to the wall mount requires a stainless steel 1/4-20 screw

supplied with the wall mount. Note the ribs on the underside of the unit base

engage slots in the mount. This allows positioning of the unit in any of four

directions with respect to the wall mount. Secure unit to the wall mount using

screw from underside of wall mount into unit and tighten.

2. WIRING OF UNIT

Fabricate the interconnecting cable in accordance with Figure 1. for proper

operation.

Figure 1

Cable Assembly Diagram

3. INVERTED MOUNTING

When the unit is mounted in the inverted position, the left-right directions are

reversed for manual operation. This must be corrected when wiring the cable

between control unit and the pan and tilt drive. Simply reverse leads going to

terminals 3 and 4.

4. ADJUSTING LIMIT STOPS

After cable is installed and unit has been mounted, proceed as follow :

1. Plug control unit into AC 24V source. Be sure auto switch is in the OFF

position.

POWER (red)

COMMON (black)

TILT DOWN (yellow)

TILT UP (blue)

PAN RIGHT (green)

PAN LEFT (white)

1 2 3 4 5

Sommario

Pagina 1

VSCP1-VISP1 VELLEMAN 1VISP1 PAN/TILT UNIT USER MAN

Pagina 2

VSCP1-VISP1 VELLEMAN 22. To adjust pan limit stops

Pagina 3

VSCP1-VISP1 VELLEMAN 3 1. Right Pan Limit Stop 2. L

Pagina 4

VSCP1-VISP1 VELLEMAN 4VSCP1 PAN/TILT SCANNER CONTRO

Pagina 5

VSCP1-VISP1 VELLEMAN 5 Operations : FRONT

Commenti su questo manuale

Nessun commento

Velleman VSCP1 USER MANUAL Manuale Utente

Navigare online o scaricare Manuale Utente per Scanner Velleman VSCP1 USER MANUAL. Velleman VSCP1 USER MANUAL User Manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Scanner Velleman VSCP1 USER MANUAL