Velleman LEDC13 Manuale Utente Scaricare il pdf (Pagina 4)

LEDC13

V. 01 – 28/03/2013 4 ©Velleman nv

Step 1 - Open the touch panel

 As shown, gently open the touch panel (for example with a small

screwdriver).

Step 2 – Disconnect the connector cable

 Open the connector and gently remove the connector cable.

Step 3 - Choose a wiring method

Connect the wires according to the mode you will use (see section

Wiring below).

Step 4 - Attach the controller on the wall

Attach and screw the controller to the wall as shown in the picture.

The distance between the screws is 60mm.

1 2 3 4 5 6 7 8 9 ... 36 37

Nessun commento

Velleman LEDC13 Manuale Utente Pagina 4