Velleman LEDC09 Manuale Utente Scaricare il pdf (Pagina 5)

LEDC09

V. 01 – 12/09/2013 5 ©Velleman nv

5. Test Mode

In test mode, you can set a static colour, or use changing colours at

different speeds.

Static Colour

To set a static colour:

1. Set DIP switch 10 to ON.

2. Set DIP switches 8 and 9 to OFF.

3. Select the desired static colour by setting the corresponding DIP

switch (1-7) to on. If all DIP switches are off, all LED lights are

out. If more than one DIP switch is set to on, the DIP switch

with the highest value prevails:

Colour

DIP switch

Red

Green

Blue

Yellow

Purple

Cyan

White

0 = off; 1 = on; x = can be either on or off.

Changing Colours

To use changing colours:

1. Set DIP switch 10 to ON.

2. Choose the desired dynamic mode:

o For switching colours, set DIP switch 8 to on and DIP switch 9

to off.

o For fading colours, set DIP switch 9 to on (DIP switch 8 can

be either on or off).

3. Set the speed of the colour change by setting the corresponding

DIP switch (1-7) to on. All DIP switches off = slowest; DIP

switch 7 on = fastest. If more than one DIP switch is set to on,

the DIP switch with the highest value prevails.

1 2 3 4 5 6 7 8 9 10 ... 43 44

Nessun commento

Velleman LEDC09 Manuale Utente Pagina 5